In water cooling towers, it is the part where the air that the fan will provide from the atmosphere enters. In order for the air inlet not to be insufficient, it must be of appropriate width. It also has some disadvantages. For example, the air speed increases and the water is dragged, the fan motor draws too much current, and the tower sucks particles due to the vacuum effect from the outer environment.

What are the uses of Cooling Tower Louvers?

If the louvers are too large, the cooling efficiency will decrease as the air cannot reach sufficient speed and there will be no quality contact with the water. The louver structure prevents sunlight and large solid objects from entering the tower pool. Cooling Tower Louvers are installed on 45-degree inclined slide slots on PVC. The slot angle depends on the louver models. It is quite easy to install and remove. In addition, it is manufactured in a form that minimizes air resistance.

Features of Shutters;

• It is very easy to change,
• It is a utility model,
• The shutter is lined up between the slide slots,
• High performance is achieved in cooling thanks to the sequential - wide distribution,
• It is suitable for every tower structure except for special applications,
• It offers a symmetrical visual,
• The mounting angle extends the tower life,
• It has a longer life than its equivalents thanks to its design,
• It preserves its shape in every season with its material quality,
• It has a simple structure and low cost,
• There is no bacterial formation in the pool that does not receive daylight thanks to the mounting angle,
• It can be cleaned very easily with pressurized water,
• It prevents water from splashing outside the tower,
• It ensures that the water quality is kept high.